Magnitude System

Full window version (looks a little nicer). Click <Back> button to get back to small framed version with content indexes.

This material (and images) is copyrighted! See my copyright notice for fair use practices.

The brightness of stars are specified with the magnitude system. The Greek astronomer Hipparchus devised this system around 150 B.C.E. He put the brightest stars into the first magnitude class, the next brightest stars into second magnitude class, and so on until he had all of the visible stars grouped into six magnitude classes. The dimmest stars were of sixth magnitude. The magnitude system was based on how bright a star appeared to the unaided eye.

By the 19th century astronomers had developed the technology to objectively measure a star's brightness. Instead of abandoning the long-used magnitude system, astronomers refined it and quantified it. They established that a difference of 5 magnitudes corresponds to a factor of exactly 100 times in intensity. The other intervals of magnitude were based on the 19th century belief of how the human eye perceives differences in brightnesses. It was thought that the eye sensed differences in brightness on a logarithmic scale so a star's magnitude is not directly proportional to the actual amount of energy you receive. Now it is known that the eye is not quite a logarithmic detector.

Your eyes perceive equal ratios of intensity as equal intervals of brightness. On the quantified magnitude scale, a magnitude interval of 1 corresponds to a factor of 1001/5 or approximately 2.512 times the amount in actual intensity. For example, first magnitude stars are about 2.5122-1 = 2.512 times brighter than 2nd magnitude stars, 2.512×2.512 = 2.5123-1 = 2.5122 times brighter than 3rd magnitude stars, 2.512×2.512×2.512 = 2.5124-1 = 2.5123 times brighter than 4th magnitude stars, etc. (See the math review appendix for what is meant by the terms ``factor of'' and ``times''.) Notice that you raise the number 2.512 to a power equal to the difference in magnitudes.

Also, some objects go beyond Hipparchus' original bounds of magnitude 1 to 6. Some very bright objects can have magnitudes of 0 or even negative numbers and very faint objects have magnitudes greater than +6. The important thing to remember is that brighter objects have smaller magnitudes than fainter objects. The magnitude system is screwy, but it's tradition! (Song from Fiddler on the Roof could be played here.)

magnitude system

Apparent Magnitude

The apparent brightness of a star observed from the Earth is called the apparent magnitude. The apparent magnitude is a measure of the star's flux received by us. Here are some example apparent magnitudes: Sun = -26.7, Moon = -12.6, Venus = -4.4, Sirius = -1.4, Vega = 0.00, faintest naked eye star = +6.5, brightest quasar = +12.8, faintest object = +27 to +28.

How do you do that?

Star A has an apparent magnitude = 5.4 and star B has an apparent magnitude = 2.4. Which star is brighter and by how many times? Star B is brighter than star A because it has a lower apparent magnitude. Star B is brighter by 5.4 - 2.4 = 3 magnitudes. In terms of intensity star B is 2.512(5.4-2.4) = 2.5123.0 = approximately 15.8 times brighter than star A. The amount of energy you receive from star B is almost 16 times greater than what you receive from star A.

Absolute Magnitude and Luminosity

If the star was at 10 parsecs distance from us, then its apparent magnitude would be equal to its absolute magnitude. The absolute magnitude is a measure of the star's luminosity---the total amount of energy radiated by the star every second. If you measure a star's apparent magnitude and know its absolute magnitude, you can find the star's distance (using the inverse square law of light brightness). If you know a star's apparent magnitude and distance, you can find the star's luminosity (see the table below). The luminosity is a quantity that depends on the star itself, not on how far away it is. For this reason a star's luminosity tells you about the internal physics of the star and is a more important quantity than the apparent brightness.

A star can be luminous because it is hot or it is large (or both!). The luminosity of an object = the amount of energy every square meter produces multiplied by its surface area. Recall from the electromagnetic radiation chapter that the amount of energy pouring through every square meter = sigma × (object's surface temperature)4, where sigma is the Stefan-Boltzmann constant. Because the temperature is raised to the fourth power, it means that the luminosity of a star increases very quickly with even slight increases in the temperature. The luminosity of a star increases very quickly with even slight increases in the temperature.

luminosity increases as temperature to 4th power

Because the surface area is also in the luminosity relation, the luminosity of a bigger star is larger than a smaller star at the same temperature. You can use the relation to get another important characteristic of a star. If you measure the apparent brightness, temperature, and distance of a star, you can determine its size.

luminosity increases as radius to 2nd power

Most famous apparently bright stars are also intrinsically bright (luminous). They can be seen from great distances away. However, most of the nearby stars are intrinsically faint. If you assume we live in a typical patch of the Milky Way Galaxy (using the Copernican principle), then you deduce that most stars are puny emitters of light. The bright stars you can see in even the city are the odd ones in our galaxy! The least luminous stars have absolute magnitudes = +19 and the brightest stars have absolute magnitudes = -8. This is a huge range in luminosity! See the ``How do you do that?'' box below the following table for examples of using the apparent and absolute magnitudes to determine stellar distances and luminosities of stars.

Magnitudes and Distances for some well-known Stars (from the precise measurements of the Hipparcos mission)

Star App.Mag.* Distance(pc) Abs.Mag. Luminosity(rel. to Sun)
Sun -26.74 4.84813×10-6 4.83 1
Sirius -1.44 2.6371 1.45 22.5
Arcturus -0.05 11.25 -0.31 114
Vega 0.03 7.7561 0.58 50.1
Spica 0.98 80.39 -3.55 2250
Barnard's Star 9.54 1.8215 13.24 1/2310
Proxima Centauri 11.01 1.2948 15.45 1/17700

*magnitudes measured using ``V'' filter, see the next section.

How do you do that?

A quantity that uses the inverse square law and the logarithmic magnitude system is the ``distance modulus''. The distance modulus = the apparent magnitude - absolute magnitude. This is equal to 5 × log(distance in parsecs) - 5. The ``log()'' term is the ``logarithm base 10'' function (it is the ``log'' key on a scientific calculator). If you measure a star's apparent magnitude and its distance from its trigonometric parallax, the star's absolute magnitude = the apparent magnitude - 5 × log(distance + 5. For example, Sirius has an apparent magnitude of -1.44 and Hipparcos measured its distance at 2.6371 parsecs, so it has an an absolute magnitude of -1.44 - 5×log(2.6371) + 5 = -1.44 - (5×0.421127) + 5 = 1.45.

If you know a star's absolute magnitude, then when you compare it to calibration stars, you can determine its distance.

Its distance = 10(apparent magnitude - absolute magnitude + 5)/5.

For example, Spica has an apparent magnitude of 0.98 and stars of its type have absolute magnitudes of about -3.55, so Spica is at a distance of 10[0.98 - (-3.55) + 5]/5 = 101.906 = 80.54 which is very close to the trig. parallax value measured by Hipparcos (Spica's absolute magnitude of -3.546 was rounded to -3.55 in the table above).

If you know two star's absolute magnitudes, you can directly compare their luminosities. The ratio of the two stars' luminosities is (Lum.*1)/(Lum.*2) = 10-0.4(abs mag*1 - abs mag*2) or in an approximate relation: Lum.*1/Lum.*2 = 2.512(abs mag*2 - abs mag*1). Remember the more luminous star has an absolute magnitude that is less than a fainter star's absolute magnitude! Try out this relation on the stars given in the table above.

Color and Temperature

Stars are dense hot balls of gas so their spectrum is close to that of a perfect thermal radiator, which produces a smooth continuous spectrum. Therefore, the color of stars depends on their temperature---hotter stars are bluer and cooler stars are redder. You can observe the star through different filters to get an approximate temperature. A filter allows only a narrow range of wavelengths (colors) through. By sampling the star's spectrum at two different wavelength ranges (``bands''), you can determine if the spectrum is that for a hot, warm, cool, or cold star. Hot stars have temperatures around 60,000 K while cold stars have temperatures around 3,000 K. The filter diagrams are shown below.

Color Index and Temperature

Hot stars appear bluer than cooler stars. Cooler stars are redder than hotter stars. The ``B-V color index'' is a way of quantifying this using two different filters; one a blue (B) filter that only lets a narrow range of colors or wavelengths through centered on the blue colors, and a ``visible'' (V) filter that only lets the wavelengths close to the green-yellow band through.

A hot star has a B-V color index close to 0 or negative, while a cool star has a B-V color index close to 2.0. Other stars are somewhere in between. Here are the steps to determine the B-V color index:

  1. Measure the apparent brightness (flux) with two different filters (B, V).
  2. The flux of energy passing through the filter tells you the magnitude (brightness) at the wavelength of the filter.
  3. Compute the magnitude difference of the two filters, B - V.

B-V for a hot star is close
to zero or negative

B-V for a cool star is greater than 2

Wien's Law and Temperature

wavelength of peak emission depends on the
temperature

Another way to measure a star's temperature is to use Wien's law described in the electromagnetic radiation chapter. Cool stars will have the peak of their continuous spectrum at long (redder) wavelengths. As the temperature of a star increases, the peak of its continuous spectrum shifts to shorter (bluer) wavelengths. The final way to measure a star's temperature is more accurate than the previous two methods. It uses the strength of different absorption lines in a star's spectrum. It is described in full a little later in the chapter. The temperatures of different types of stars are summarized in the Main Sequence Star Properties table below.

Vocabulary

absolute magnitude apparent magnitude filter
luminosity magnitude

Formulae

Review Questions

  1. What does a magnitude interval of 5 correspond to in brightness? How about an interval of 1? How about an interval of 3?
  2. Do bright things have larger or smaller magnitudes than fainter things?
  3. How is apparent magnitude different from absolute magnitude?
  4. Put the following objects (given with their apparent magnitudes) in order of brightness as seen from Earth (faintest first): Sun (-26.7), Venus (-4.4), Barnard's Star (9.5), Sirius (-1.4), Proxima Centauri (11.0).
  5. You receive 8× 10-9 Watts/meter2 of energy from a star 2 parsecs away with an apparent magnitude = 1.3. What is the energy you receive from a star with an apparent magnitude = 5.3?
  6. Two identical stars but star B is 10X farther away than star A. What is the difference in magnitudes between the two stars?
  7. What two things does luminosity depend on?
  8. If our Sun has luminosity = 1 solar luminosity, what is the luminosity of the following stars if they have the same diameter as the Sun (fill in the table):
    star temperature (K) luminosity
    Sun 6,000 1
    A 12,000
    B 2,000
    C 36,000
  9. Some stars have temperatures of only 3000 K but have over 100X more luminosity than the Sun. How is this possible?
  10. Would a red giant have a smaller or larger magnitude in a ``V'' filter than in a ``B'' filter? (Remember the first rule of magnitudes!)

previous Go to Distances section next Go to Stellar Composition section

Go to Astronomy Notes beginning

Go to Astronomy 1 homepage

last update: 02 March 1999


Nick Strobel -- Email: strobel@lightspeed.net

(661) 395-4526
Bakersfield College
Physical Science Dept.
1801 Panorama Drive
Bakersfield, CA 93305-1219